TP.RT2982.PB801 Firmware: Hey Guys This is a new post on soft4led. Here In this post, you will get the firmware files for the latest 4k Android LED TV board that is TP.RT2982.PB801. So guys here you can download all TP.RT2982.PB801 Firmware resolution for free of cost. Many people search for this on Google and they can’t find, I know because this is only a site that provides tested and genuine LED TV Firmware files.
As you guys today we are providing TP.RT2982.PB801 All latest Firmware/Software files in al resolution for all panel sizes that can support this mainboard. We will give you the firmware and also tell you how to download and update the firmware in TP.RT2982.PB801 Smart main Board. So are you ready? well, guys, one thing keep in mind, please. I would say, use this software ay your own risk because many peoples update the firmware is not a proper way and it is not our responsibility. I am sure you can understand this.
|Operating System||Android 4.4|
|CPU||4-Core A7 1GHz|
|RAM||512 MB of DDR|
|OSD language||ENGLISH, CHINESE|
How to Download TP.RT2982.PB801 Firmware
Do you want to download TP.RT2982.PB801 Firmware? first, you need to see your TV panel datasheet to ensure the resolution of the panel. If you know the resolution and the model of your screen panel. then Please go download to the table and then find your required model there. If you found then click o the download button. And that’s it after clicking the download button, the firmware file will start the download.
How to Update TP.RT2982.PB801 Firmware
It is a very easy process to install/update the firmware. You just need a proper guide about it. And I will give you the proper guidance. Here I am showing some easy steps by following them you will be able to install/update the firmware easily. You will not face any problem if you follow every step carefully. You must keep in mind, if you do any mistake then it will be your loss, the soft4led team will not be responsible for this.
- First, to install the firmware you need a USB Disk, Take any 2.0 USB Flash
- Download the firmware and extract it, Move Bin file form the extracted folder
- Here the USB Flash is ready, Now go the TV and Plug USB into the mainboard
- Now power on LD TV and press the main button, after that wait for some seconds
- After waiting for the file will be start loading and red led will start blinking
- When it stops blinking and led goes to sleep, remove your Flash Disk
- And start the LED TV, S.W is installed Enjoy!
TP.RT2982.PB801 Firmware Download
Here is the final download table, download any resolution from the table. The downloaded file will be a RAR file. You should use WinRAR to extract the RAR file to get the Bin file.
You will Also Like This:
So guys how was the download experience from this site. I am sure you had never seen this type of downloading before. If you found any type of problem during the download the please let me know by the comment box. Our team is trying to avail a maximum of LED TV Board Model firmware files, and we are also trying to do this as soon as possible. You can help us by giving suggestions about the firmware files. So the comment box is waiting for you to tell us everything you want.