HK-T.RT2995V01 Firmware Free Download

1714

If you have an HK-T.RT2995V01 Smart LED TV Board then here is the best content for you. Here you will find HK-T.RT2995V01 Firmware, How to Download and Software Installation guide on this post for free of cost.

In this post, I will try to share some good Bin files for HK-T.RT2995V01 Firmware in many resolutions and Logo, and Remote Controls. Basically you can install any Logo, and Remote Control in this board by using the Firmware Bin File. There are two types of LCD/LED TV Firmware files the first is USB Updateable and to install the second type of LCD/LED TV Firmware you need a Bios Programmer, Like RT809H or other. And fortunately, this is the first type of firmware, it means you can install or update the HK-T.RT2995V01 firmware via USB Flash Disk Drive or and SD Card.

Here you can find a lot of firmware files for free download. Some friends have requested on our Facebook group for the HK-T.RT2995V01 Firmware/Software. So now we are here with the multiple firmware resolution files of this smartboard. Here you can download HK-T.RT2995V01 Firmware with 3840×2160 resolution and Toshiba L3400 LED TV Model and many more for free of cost. As you already we are giving you all these files for free, so it’s your responsibility to use them in the right way. If you haven’t any knowledge about LED TV Firmware update then you should not try to do this. Otherwise, you may lose your smartboard or display panel.

HK-T.RT2995V01 Firmware
HK-T.RT2995V01 Firmware
HK-T.RT2995V01
HK-T.RT2995V01

HK-T.RT2995V01 Specifications

Smart Board ModelHK-T.RT2995V01
Smart Board BrandUniversal 4K Smart Board
TV ModelToshiba L3400
Resolutions3840×2160
Operating SystemAndroid
RAM1 GB
ROM8 GB
CPUQuad Core
WIFI SupportedYES
RJ45 ConnectorYES
4K LED TV BoardYES
Numbers of USB Ports2
Numbers of HDMI Ports3
Panel Voltages12V
Mainboard Input Voltages100 to 220V AC
USB Update SupportYES

HK-T.RT2995V01 is a Universal 4K SMart LED TV Board that is 3840×2160 resolution supported. The Board is dedicated to 120Hz Display Screen Panels. It has multiple AV. HDMI, USB, and other ports. YOu will also see there RJ45 Connector to connect the internet with this board. And VGA is also available to connect the smart board with PC.

How to Choose a Resolution

It is the very easiest way to find the best and right HK-T.RT2995V01 firmware resolution for your Smart LED TV. You just need to see the datasheet of your screen panel and mainboard then match the specifications with the following HK-T.RT2995V01 firmware resolution files. You can find your Display panel’s datasheets by searching on google. If you have found it then well and good if not then you can contact us in the comment section for further information.

How to Download HK-T.RT2995V01 Firmware

Hundreds of peoples daily ask us for the HK-T.RT2995V01 Firmware software download process of this site. But there is not any difficulty to download any firmware software file form this website. If you are still not able to download then follow the two steps mentioned below. Then easily download any file. You can contact us if you have seen any expired or broken links in the post. Please use the comment section to report any link or any content.

  • Choose the Right HK-T.RT2995V01 Firmware resolution, then click the download button
  • It will take u to another page, On the next page again, click the download button
  • That’s it the firmware file will start downloading after the above two steps.

How to Update the HK-T.RT2995V01 Firmware

Now come to the firmware update process. Some beginners and new technicians make too many mistakes. SO they burn or damage their LCD/LED TV Main Board or Display Panel. But here I am going to mention all basic to advanced steps to install or update the HK-T.RT2995V01 firmware on your LED TV. So let’s start with the steps one.

  • Take an empty USB or SD card and format it using fat32 format system
  • Download the Resolution and convert it from the RAR to the Bin file format
  • You can use the WinRAR Extractor to extract it in Windows, or Android OS
  • Now, Insert the USB/SD Card to Main Board’s USB Port and plugin the power
  • Press the power button on the remote control and wait for some seconds
  • After. You will see the HK-T.RT2995V01 Firmware bin file will start loading itself
  • When LED TV goes to sleep after a process, then remove USB and Start LED TV
T.RT2995V01 Smart Board
T.RT2995V01 Smart Board

HK-T.RT2995V01 Firmware Download

HK-T.RT2995V01-3840×2160-Toshiba L3400Download

Interesting For You

LEAVE A REPLY

Please enter your comment!
Please enter your name here