How to Reset a Smart TV Without a Remote When Stuck on Logo

490

In this article, we will discuss the process of resetting a smart TV when it’s stuck on the logo screen. It is important to know when and how to reset the TV.

Sometimes, we encounter situations where a normal factory data reset is not possible, or the TV’s software crashes, hangs, or gets stuck on the boot screen. In such cases, a forced factory data reset, also known as a hard reset or entering into recovery mode, becomes necessary. However, it is crucial to note that performing a forced factory data reset will erase all customized settings, including the parental lock setting, as well as the following:

  1. Google Account/Gmail Account/Play Store Account
  2. Application data and system data
  3. Network settings and wireless key
  4. User data, such as channel settings and other preferences
How to Reset a Smart TV
How to Reset a Smart TV

How to Reset a Smart TV

Below are several procedures for resetting different Chinese Smart TVs. However, it is important to note that these methods will only work on TVs that have a recovery option available in their software:

Method 1:

  1. Press and hold the Power/Standby button and VOL- key on the TV.
  2. Power on the switch while continuing to hold the buttons.
  3. Keep pressing for about 30 seconds until the green light blinks.
  4. The LED TV will reboot itself.
  5. The TV will enter Recovery Mode and clear all user data and cache.
  6. The LED TV will reboot again and display the initial setup screen.
  7. You can now proceed with setting up and scanning channel data.

Method 2:

  1. Press and hold the Power/Standby button and VOL+ key on the TV.
  2. Power on the switch while continuing to hold the buttons.
  3. Keep pressing for about 30 seconds until the green light blinks.
  4. The LED TV will reboot itself.
  5. The TV will enter Recovery Mode and clear all user data and cache.
  6. The LED TV will reboot again and display the initial setup screen.
  7. You can now proceed with setting up and scanning channel data.

Method 3:

  1. Press and hold the VOL- and VOL+ keys on the TV.
  2. Power on the switch while continuing to hold the buttons.
  3. Keep pressing for about 30 seconds until the green light blinks.
  4. The LED TV will reboot itself.
  5. The TV will enter Recovery Mode and clear all user data and cache.
  6. The LED TV will reboot again and display the initial setup screen.
  7. You can now proceed with setting up and scanning channel data.

Method 4:

  1. Press and hold the CH- and CH+ keys on the TV.
  2. Power on the switch while continuing to hold the buttons.
  3. Keep pressing for about 30 seconds until the green light blinks.
  4. The LED TV will reboot itself.
  5. The TV will enter Recovery Mode and clear all user data and cache.
  6. The LED TV will reboot again and display the initial setup screen.
  7. You can now proceed with setting up and scanning channel data.

Method 5:

  1. Press and hold the Home and Menu keys on the remote.
  2. Power on the switch while continuing to hold the buttons.
  3. The TV will turn on in recovery mode. Select the option to wipe out data.
  4. The LED TV will reboot itself.
  5. The TV will enter Recovery Mode and clear all user data and cache.
  6. The LED TV will reboot again and display the initial setup screen.
  7. You can now proceed with setting up and scanning channel data.

Method 6:

  1. Press and hold the Confirm (OK) and Restore keys on the remote.
  2. Power on the switch while continuing to hold the buttons.
  3. The TV will turn on in recovery mode. Select the option to wipe out data.
  4. The LED TV will reboot itself.
  5. The TV will enter Recovery Mode and clear all user data and cache.
  6. The LED TV will reboot again and display the initial setup screen.
  7. You can now proceed with setting up and scanning channel data.

Method 7:

  1. Power on the switch and release the standby button on the TV keypad.
  2. Immediately press and hold the Vol+ or VOL- key until the recovery screen is displayed.
  3. Select the option to Wipe Data/Factory Reset.
  4. If the remote control does not work, use an external keyboard or mouse.
  5. The LED TV will reboot itself and display the initial setup screen.
  6. You can now proceed with setting up and scanning channel data.

Useful Links

References

LEAVE A REPLY

Please enter your comment!
Please enter your name here