How To Remove the Protection Of The Inverter? All IC Pin Details

Hi, If you are searching for the Protection IC Pin Detail and the procedure to remove the protection of the inverter then we warmly welcome you to this post.

Hey, guys what’s up? I am sure you will like to get your Inverter IC Protection Pin Details and also the complete guide to bypass or remove that protection for your Protection IC. Is it right? So guys today in this new post we are going to share All LED TV Backlight Inverter Remove/Bypass Methods.

They will help a lot of a new beginner in this Electronics Field. We will show you the complete process to remove the protection of an IC. Basically sometimes due to some issues, your TV goes to protection mode. And that we need to do some modifications with our Protection IC on the Inverter Board and the problem can be solved.

So below is the huge table provided. You just need to search your Inverter IC Number in the table by pressing the Ctrl+F on the Keyboard and entering your IC Number then pressing enter. After that, you will see your Inverter IC number will be shown in the highlighted color. Now you can see the full process so that you will be able to do the Protection Remove/Bypass on your Inverter Board.

All IC Protection Remove Methods and Pin Details

SEM2005 Remove Protection

You just need to Short Pin No 1 from an 82K resistor to the ground. And check the Protection of the SEM2005 Inverter IC will be removed easily.

SEM2006 Remove Protection

The SEM2006 Protection Pin is Pin No 5. You Need to short this Pin to the ground.

SEM2105 Protection Pin

Short an LED from Pin number 1 to the ground.

SEM2107 Remove Protection

Short and LED from Pin No 21 to the ground and the protection will be removed from this IC.

SS1091ASN Remove Protection

Connect and LED from Pin No 19 to the ground.

TL5001 Remove Protection

Please Connect an LED from Pin number 5 to the ground.

TA9687 Remove Protection

Connect a 47K resistor from pin 12, Timmer Pin, to the ground

OZ9938 Protection Remove

Short the Pin No 3,6,7 to the ground Remove the grounding resistance to remove the OZ9938 Protection.

OZ960 Disable Protection

Just Short Pin No 2 to the ground and check surely, the protection will be removed.

OZ9970 Protection Remove

You need to connect the 1.8 to 2V to Pin number 4 and the protection will be removed.

OZ9966 Protection Pin

Connect the 10K-ohm resistor from Pin Number 15 to the ground.

OZ9937 Protection Pin

Short the resistor with from Number 14 Timmer Pin to the ground.

OZ9910 Protection Pin

Connect the 82k ohm resistor from Pin Number 6 to the ground

OZ964 Protection Pin

Pin 4 must have a voltage between 1.8 and 2 V.

OZ960 Disable Protection

Pin 4 must have a voltage between 1.8 and 2 V.

OB3316 Protection Pin

Connect and LED from Pin No 5 to the ground.

TL494 Protection Pin

Short the Pin No 1 and 16 to the ground and the protection of the TL494 IC, will be removed/bypassed. If haven’t worked, just sort the Pin No 4

KA7500 Protection Pin

Short the Pin 1 and 16 to the ground and the protection will be removed.

MP1038EY Protection Remove

Just Connect Pin 2 and 11 with each other and the Protection will b removed.

TA9687GN Protection Remove

If you want To remove the protection please connect the 47K Resistor from Pin 12 to the Ground.

How To Remove the Protection Of The Inverter?

Guys, This is the very largest topic in LED TV repairing so we will follow every step one by one In this article. So let’s start.

Sometimes LED TV backlight blinks and is suddenly turned off. If the TV set is ready and on but the LED Backlight is not glowing. Then this issue can be solved by removing the protection of the Inverter IC.

When the LED TV suddenly goes to the Protection mode then to remove the protection, we want to do some adjustments with the Inverter IC in the inverter board. To do this you must have theoretical and good practical knowledge about it which we are going to provide here.

Basically, we can’t tell you the whole process in a few words because this is not a simple process. First of all, you need to confirm, is your LED TV has gone to protection. if yes then move forward to remove it.

To do that you need to read the inverter IC number, it can be anything the collection of some Characters. So now let’s assume you have the IC number and now you want to remove the protection of this IC. Now, just scroll down and search for the IC number in this post.

If you have found it then just see the complete process to remove the Protection of that particular IC.